ziver/hal
1
1
Fork 0
Code Pull requests Releases Activity

Removed unnecessary extra layer in resource folder structure.

Browse source
This commit is contained in:
Ziver Koc 2023-01-09 01:02:37 +01:00
parent 94485b5633
commit d8a1b66738
190 changed files with 11 additions and 11 deletions
Download patch file Download diff file Expand all files Collapse all files

121
plugins/hal-zwave/resources/config/philio/psm02.xml Normal file
View file

@ -0,0 +1,121 @@
<?xml version="1.0" encoding="UTF-8"?>
<Product xmlns="http://code.google.com/p/open-zwave/">
<!-- Configuration Parameters -->
<CommandClass id="112">
<Value type="byte" instance="1" index="2" genre="config" label="2. Basic Set Level" min="1" max="255" value="255">
<Help>
Setting the BASIC command value to turn on the light. The 0xFF (255) means turn on the light.
For dimmer equipment 1 to 100 means the light strength.
</Help>
</Value>
<Value type="byte" instance="1" index="3" genre="config" label="3. PIR Sensitivity" min="0" max="99" value="70">
<Help>
PIR sensitivity settings.
0 means disable the PIR motion.
1 means the lowest sensitivity.
99 means the highest sensitivity.
High sensitivity means can detect long distance, but if there is more noise signal in the environment, it will re-trigger too frequently.
</Help>
</Value>
<Value type="byte" instance="1" index="4" genre="config" label="4. Light threshold" min="0" max="100" value="99">
<Help>
Setting the illummination threshold to turn on the light. When the event triggered and the environment illumination lower then
the threshold, the device will turn on the light.
0 means turn off illumination detected function and never turn on the light.
1 means darkest.
99 means brightest.
100 means turn off illumination detected function. And always turn on the light.
* Notice * in none test mode, only the value in 1 to 99 will enable the illumination detected function and update the illumination value.
</Help>
</Value>
<Value type="byte" instance="1" index="5" genre="config" label="5. Operation Mode" min="0" max="127" value="0">
<Help>
Bit 0: 1 means security mode; 0 means home automation mode.
Bit 1: 1 means enable test mode; 0 means disable test mode
* Notice * Bit 0 and bit 1 will effect when the DIP Switch setting to program mode. If bit1 is enabled, the bit0 is useless.
Bit 2: Reserved, always 1.
Bit 3: Setting the temperature scale; 0: Fahrenheit, 1:Celsius
Bit 4: Disable illumination report after event triggered.
Bit 5: Disable temperature report after event triggered
</Help>
</Value>
<Value type="byte" instance="1" index="6" genre="config" label="6. Multi-Sensor Function Switch" min="0" max="127" value="4">
<Help>
Multi-Sensor Function switch. Using bit to control.
Bit 0: Reserved, always 1.
Bit 1: Disable PIR integrate Illumination.
Bit 2: Reserved, always 1.
Bit 3: Reserved.
Bit 4: Reserved.
Bit 5: Reserved.
Bit 6: Enable temperature monitoring. When this bit enabled, the temperature changed 3 degree Fahrenheit, it will report.
And also the temperature over 140 degree Fahrenheit, it will report every 64 seconds.
</Help>
</Value>
<Value type="byte" instance="1" index="8" genre="config" label="8. PIR re-detect interval time" units="8 sec" min="3" max="27" value="3">
<Help>
In the security mode, after the PIR report motion detected, setting the re-detect time. 8 seconds per tick, and minimum time is 24 seconds, default tick is 3 (24 seconds).
Setting the suitable value to prevent received the trigger signal too frequency. Also can save the battery energy.
* Notice * If this value bigger than the configuration setting NO. 9. There is a period after the light turned off and the PIR not detecting.
</Help>
</Value>
<Value type="byte" instance="1" index="9" genre="config" label="9. Turn Off Light Time" units="8 sec" min="4" max="127" value="4">
<Help>
After turn on the light, setting the delay time to turn off the light when the PIR motion is not detected.
8 seconds per tick, and minimum time is 32 seconds, default tick is 4 (32 seconds).
</Help>
</Value>
<Value type="byte" instance="1" index="10" genre="config" label="10. Auto Report Battery Time" units="30 min" min="1" max="127" value="12">
<Help>
The interval time for auto report the battery level.
30 minutes per tick and minimum time is 30 minutes, default tick is 12 (6 hours)
</Help>
</Value>
<Value type="byte" instance="1" index="12" genre="config" label="12. Auto Report Illumination Time" units="30 min" min="1" max="127" value="12">
<Help>
The interval time for auto report the illumination.
30 minutes per tick and minimum time is 30 minutes, default tick is 12 (6 hours)
</Help>
</Value>
<Value type="byte" instance="1" index="13" genre="config" label="13. Auto Report Temperature time" units="30 min" min="1" max="127" value="12">
<Help>
The interval time for auto report the temperature.
30 minutes per tick and minimum time is 30 minutes, default tick is 12 (6 hours)
</Help>
</Value>
</CommandClass>
<!-- Basic set as report -->
<!-- <CommandClass id="32" setasreport="true" ignoremapping="true"/> -->
<CommandClass id="48" create_vars="false">
<Instance index="1" />
<Value type="bool" genre="user" instance="1" index="0" label="Motion Sensor" read_only="true" write_only="false" min="0" max="0" value="false" />
<Value type="bool" genre="user" instance="1" index="1" label="Door/Window Sensor" read_only="true" write_only="false" value="false" />
<Value type="bool" genre="user" instance="1" index="2" label="Tamper Sensor" read_only="true" write_only="false" min="0" max="0" value="false" />
<SensorMap index="0" type="12" />
<SensorMap index="1" type="10" />
<SensorMap index="2" type="8" />
</CommandClass>
<!-- Association Groups -->
<CommandClass id="133">
<Associations num_groups="2">
<Group index="1" max_associations="7" label="Report message" auto="true"/>
<Group index="2" max_associations="7" label="Light control" auto="true"/>
</Associations>
</CommandClass>
</Product>