Removed unnecessary extra layer in resource folder structure.
This commit is contained in:
parent
94485b5633
commit
d8a1b66738
190 changed files with 11 additions and 11 deletions
12
plugins/hal-zwave/resources/config/everspring/an145.xml
Normal file
12
plugins/hal-zwave/resources/config/everspring/an145.xml
Normal file
|
|
@ -0,0 +1,12 @@
|
|||
<?xml version="1.0" encoding="utf-8"?>
|
||||
<!-- EVERSPRING AN145 SCREW-IN ON/OFF MODULE -->
|
||||
<!-- Information from http://www.pepper1.net/zwavedb/device/57 -->
|
||||
<Product xmlns='http://code.google.com/p/open-zwave/'>
|
||||
<!-- Configuration Parameters not supported -->
|
||||
<!-- Association Groups -->
|
||||
<CommandClass id="133">
|
||||
<Associations num_groups="1">
|
||||
<Group index="1" max_associations="5" label="Basic" auto="true"/>
|
||||
</Associations>
|
||||
</CommandClass>
|
||||
</Product>
|
||||
35
plugins/hal-zwave/resources/config/everspring/an158.xml
Normal file
35
plugins/hal-zwave/resources/config/everspring/an158.xml
Normal file
|
|
@ -0,0 +1,35 @@
|
|||
<?xml version="1.0" encoding="utf-8"?>
|
||||
<!-- EVERSPRING AN158 ON/OFF MODULE -->
|
||||
<!-- Information from http://www.pepper1.net/zwavedb/device/54 -->
|
||||
<Product xmlns='http://code.google.com/p/open-zwave/'>
|
||||
<!-- Configuration Parameters -->
|
||||
<CommandClass id="112">
|
||||
<Value type="short" index="1" genre="config" label="True Period" units="100ms" min="0" max="120" value="10">
|
||||
<Help>
|
||||
This is the time the switching status needs to remain
|
||||
unchanged after a change to cause the device to send out a status
|
||||
message. 0 is Disabled.
|
||||
</Help>
|
||||
</Value>
|
||||
<Value type="byte" index="2" genre="config" label="Send Out Basic Command" units="" min="0" max="1" value="0">
|
||||
<Help>
|
||||
Enable or Disable Send Basic Command to Group 2 when the local
|
||||
button press changes the switching state.
|
||||
</Help>
|
||||
</Value>
|
||||
<Value type="short" index="3" genre="config" label="Meter Report Period" units="10s" min="0" max="3240" value="3">
|
||||
<Help>
|
||||
The device will report its meter value within the interval
|
||||
set. Set to 0 will disable the autoreporting function.
|
||||
</Help>
|
||||
</Value>
|
||||
</CommandClass>
|
||||
|
||||
<!-- Association Groups -->
|
||||
<CommandClass id="133">
|
||||
<Associations num_groups="2">
|
||||
<Group index="1" max_associations="1" label="Reports" auto="true" />
|
||||
<Group index="2" max_associations="4" label="Basic" auto="true" />
|
||||
</Associations>
|
||||
</CommandClass>
|
||||
</Product>
|
||||
13
plugins/hal-zwave/resources/config/everspring/se812.xml
Normal file
13
plugins/hal-zwave/resources/config/everspring/se812.xml
Normal file
|
|
@ -0,0 +1,13 @@
|
|||
<?xml version="1.0" encoding="utf-8"?>
|
||||
<!-- EVERSPRING SE812 SIREN -->
|
||||
<Product xmlns='http://code.google.com/p/open-zwave/'>
|
||||
<!-- Configuration Parameters not supported -->
|
||||
<!-- Wakeup doesn't respond -->
|
||||
<CommandClass id="132" create_vars="false" />
|
||||
<!-- Association Groups -->
|
||||
<CommandClass id="133">
|
||||
<Associations num_groups="1">
|
||||
<Group index="1" max_associations="5" label="Reports" auto="true"/>
|
||||
</Associations>
|
||||
</CommandClass>
|
||||
</Product>
|
||||
12
plugins/hal-zwave/resources/config/everspring/sf812.xml
Normal file
12
plugins/hal-zwave/resources/config/everspring/sf812.xml
Normal file
|
|
@ -0,0 +1,12 @@
|
|||
<?xml version="1.0" encoding="utf-8"?>
|
||||
<!-- EVERSPRING SF812 SMOKE DETECTOR -->
|
||||
<Product xmlns='http://code.google.com/p/open-zwave/'>
|
||||
<!-- Configuration Parameters not supported -->
|
||||
<!-- Association Groups -->
|
||||
<CommandClass id="133">
|
||||
<!-- Groups and attributes based on http://www.pepper1.net/zwavedb/uploads/resources/fdeac2e16823d1f80c667ca4cc3ae32253ef4713.pdf -->
|
||||
<Associations num_groups="1">
|
||||
<Group index="1" max_associations="5" label="Reports" auto="true"/>
|
||||
</Associations>
|
||||
</CommandClass>
|
||||
</Product>
|
||||
35
plugins/hal-zwave/resources/config/everspring/sm103.xml
Normal file
35
plugins/hal-zwave/resources/config/everspring/sm103.xml
Normal file
|
|
@ -0,0 +1,35 @@
|
|||
<?xml version="1.0" encoding="utf-8"?>
|
||||
<Product xmlns='http://code.google.com/p/open-zwave/'>
|
||||
<!-- Configuration Parameters -->
|
||||
<CommandClass id="112">
|
||||
<Value type="byte" index="1" genre="config" label="On Level" units="" min="0" max="127" value="99">
|
||||
<Help>
|
||||
Defines the level in the event sent when the sensor is triggered. Default is 99 (full brightness for a Z-Wave dimmer). 100-127 will set device on to the last value it was when turned off.
|
||||
</Help>
|
||||
</Value>
|
||||
<Value type="byte" index="2" genre="config" label="Off Time" units="seconds" min="0" max="127" value="1">
|
||||
<Help>
|
||||
On Time sets the number of seconds the sensor stays alerted before the off event is sent.
|
||||
</Help>
|
||||
</Value>
|
||||
<Value type="byte" index="3" genre="config" label="Power Saving" units="" min="0" max="127" value="0">
|
||||
<Help>
|
||||
Enable/Disable power saving mode. 0 enables.
|
||||
</Help>
|
||||
</Value>
|
||||
</CommandClass>
|
||||
|
||||
<!-- Basic set as report -->
|
||||
<CommandClass id="32" setasreport="true"/>
|
||||
<!-- COMMAND_CLASS_ALARM. This class is supported but is missing from the list reported by the SM103 -->
|
||||
<CommandClass id="113" action="add" getsupported="false" />
|
||||
|
||||
<!-- COMMAND_CLASS_ASSOCIATION. Groups -->
|
||||
<CommandClass id="133">
|
||||
<Associations num_groups="1">
|
||||
<Group index="1" max_associations="5" label="Reports" auto="true" />
|
||||
</Associations>
|
||||
</CommandClass>
|
||||
|
||||
</Product>
|
||||
|
||||
39
plugins/hal-zwave/resources/config/everspring/sp103.xml
Normal file
39
plugins/hal-zwave/resources/config/everspring/sp103.xml
Normal file
|
|
@ -0,0 +1,39 @@
|
|||
<?xml version="1.0" encoding="utf-8"?>
|
||||
<!-- EVERSPRING SP103 MOTION DETECTOR -->
|
||||
<Product xmlns='http://code.google.com/p/open-zwave/'>
|
||||
<!-- Configuration Parameters -->
|
||||
<CommandClass id="112">
|
||||
<Value type="byte" index="1" genre="config" label="ON Phase Level" units="" min="0" max="127" value="0">
|
||||
<Help>
|
||||
Phase Level of ON Command
|
||||
The Configuration parameter that can be used to adjust the phase level of ON command is transmitted is Configuration Parameter # 1.
|
||||
This parameter can be configured with the value of 0 through 127.
|
||||
Value 0: Set Device OFF(0x00)
|
||||
Value 1-99: Set Device On (1-99)
|
||||
Value 100-127: Set Device On to the last phase (0xFF)
|
||||
Note: 0xFF means the device will be on to the last phase before the device was turned off.
|
||||
Information reproduced from: http://www.techstyleuk.co.uk/index_files/sp103_manual.pdf
|
||||
</Help>
|
||||
</Value>
|
||||
<Value type="byte" index="3" genre="config" label="Power Saving" units="" min="0" max="127" value="1">
|
||||
<Help>
|
||||
Enabling/Disabling Power Saving Function (for testing)
|
||||
When no movement has been detected for 10 seconds, the SP103 will enter the power saving mode.
|
||||
It can be disabled or enabled power saving function by setting Configuration Parameter # 3.
|
||||
This parameter can be configured with the value of 0 through 127, where 0 means power saving being enabled and others mean power saving being disabled.
|
||||
PS : As long as the batteries have been refitted, the Detector will enable the power saving function automatically.
|
||||
Information reproduced from: http://www.techstyleuk.co.uk/index_files/sp103_manual.pdf
|
||||
</Help>
|
||||
</Value>
|
||||
</CommandClass>
|
||||
<CommandClass id="32" setasreport="true" />
|
||||
<!-- COMMAND_CLASS_ALARM. This class is supported but is missing from the list reported by the SP103 -->
|
||||
<CommandClass id="113" action="add" />
|
||||
<!-- Association Groups -->
|
||||
<CommandClass id="133">
|
||||
<!-- Groups and attributes based on http://www.pepper1.net/zwavedb/device/59 -->
|
||||
<Associations num_groups="1">
|
||||
<Group index="1" max_associations="5" label="Motion" auto="true"/>
|
||||
</Associations>
|
||||
</CommandClass>
|
||||
</Product>
|
||||
48
plugins/hal-zwave/resources/config/everspring/sp814.xml
Normal file
48
plugins/hal-zwave/resources/config/everspring/sp814.xml
Normal file
|
|
@ -0,0 +1,48 @@
|
|||
<?xml version="1.0" encoding="utf-8"?>
|
||||
<Product xmlns='http://code.google.com/p/open-zwave/'>
|
||||
<!-- Configuration Parameters -->
|
||||
<CommandClass id="112">
|
||||
<Value type="byte" index="1" genre="config" label="Basic Set Level" units="" min="0" max="99" value="99">
|
||||
<Help>
|
||||
When Basic Set Command is sent where contains a value, the receiver will take it for consideration; for instance, if a lamp module is received the Basic Set Command of which value is decisive as to how bright of dim level of lamp modeule shall be.
|
||||
</Help>
|
||||
</Value>
|
||||
<Value type="bool" index="2" genre="config" label="Enable/Disable Detecting" min="0" max="1" value="1">
|
||||
<Help>
|
||||
The Detecting function can be Disabled of Enabled.
|
||||
</Help>
|
||||
</Value>
|
||||
<Value type="byte" index="3" genre="config" label="Sensitivity Level" units="" min="1" max="10" value="6">
|
||||
<Help>
|
||||
1 Means lowest sensitivity and 10 means highest.
|
||||
</Help>
|
||||
</Value>
|
||||
<Value type="byte" index="4" genre="config" label="Re-trigger Interval Setting" units="Seconds" min="5" max="3600" value="5">
|
||||
<Help>
|
||||
Adjust the interval of being re-triggered afer the detector has been triggered in seconds.
|
||||
</Help>
|
||||
</Value>
|
||||
<Value type="byte" index="5" genre="config" label="Lux Level" units="%" min="1" max="100" value="10">
|
||||
<Help>
|
||||
Sets minimum Lux Level of ambient illumination neccesary for Motion Detector to trigger.
|
||||
</Help>
|
||||
</Value>
|
||||
<Value type="byte" index="6" genre="config" label="On-Off Duration" units="Seconds" min="5" max="3600" value="5">
|
||||
<Help>
|
||||
The duration determines how long before the module sends an Off after being triggered.
|
||||
</Help>
|
||||
</Value>
|
||||
</CommandClass>
|
||||
|
||||
<!-- Basic set as report -->
|
||||
<CommandClass id="32" setasreport="true"/>
|
||||
|
||||
<!-- COMMAND_CLASS_ASSOCIATION. Groups -->
|
||||
<CommandClass id="133">
|
||||
<Associations num_groups="2">
|
||||
<Group index="1" max_associations="1" label="Reports" />
|
||||
<Group index="2" max_associations="3" label="Control" />
|
||||
</Associations>
|
||||
</CommandClass>
|
||||
|
||||
</Product>
|
||||
56
plugins/hal-zwave/resources/config/everspring/st814.xml
Normal file
56
plugins/hal-zwave/resources/config/everspring/st814.xml
Normal file
|
|
@ -0,0 +1,56 @@
|
|||
<?xml version="1.0" encoding="utf-8"?>
|
||||
<Product xmlns='http://code.google.com/p/open-zwave/'>
|
||||
<!-- Configuration Parameters -->
|
||||
<CommandClass id="112">
|
||||
<Value type="byte" index="1" genre="config" label="Basic Set Level" units="%" min="0" max="99" value="99">
|
||||
<Help>
|
||||
Defines the level in the Basic Set event sent to group 2 when the sensor is triggered. Default is 99 (full brightness for a Z-Wave dimmer). 0 disables.
|
||||
</Help>
|
||||
</Value>
|
||||
<Value type="byte" index="2" genre="config" label="Temperature On Trigger" units="degrees" min="-20" max="99" value="30">
|
||||
<Help>
|
||||
Temperature level to trigger when a ON command is sent out. 99 will clear the value.
|
||||
</Help>
|
||||
</Value>
|
||||
<Value type="byte" index="3" genre="config" label="Temperature Off Trigger" units="degrees" min="-20" max="99" value="20">
|
||||
<Help>
|
||||
Temperature level to trigger when an OFF command is sent out. 99 will clear the value.
|
||||
</Help>
|
||||
</Value>
|
||||
<Value type="byte" index="4" genre="config" label="Humidity On Trigger" units="%" min="20" max="99" value="50">
|
||||
<Help>
|
||||
Humidity level to trigger when a ON command is sent out. 99 will clear the value.
|
||||
</Help>
|
||||
</Value>
|
||||
<Value type="byte" index="5" genre="config" label="Humidity Off Trigger" units="%" min="20" max="99" value="40">
|
||||
<Help>
|
||||
Humidity level to trigger when a OFF command is sent out. 99 will clear the value.
|
||||
</Help>
|
||||
</Value>
|
||||
<Value type="short" index="6" genre="config" label="Auto Report Time" units="minutes" min="0" max="1439" value="0">
|
||||
<Help>
|
||||
Sets the auto report time interval. 0 disables.
|
||||
</Help>
|
||||
</Value>
|
||||
<Value type="byte" index="7" genre="config" label="Auto Report Temperature" units="degrees" min="0" max="70" value="0">
|
||||
<Help>
|
||||
Sets the auto report temperature trigger interval. 0 disables.
|
||||
</Help>
|
||||
</Value>
|
||||
<Value type="byte" index="8" genre="config" label="Auto Report Humidity" units="%" min="5" max="70" value="0">
|
||||
<Help>
|
||||
Sets the auto report humidity trigger interval. 0 disables.
|
||||
</Help>
|
||||
</Value>
|
||||
</CommandClass>
|
||||
|
||||
<!-- COMMAND_CLASS_ASSOCIATION. Groups -->
|
||||
<CommandClass id="133">
|
||||
<Associations num_groups="2">
|
||||
<Group index="1" max_associations="1" label="Reports" auto="true" />
|
||||
<Group index="2" max_associations="3" label="Basic" auto="true" />
|
||||
</Associations>
|
||||
</CommandClass>
|
||||
<CommandClass id="96" mapping="endpoints" />
|
||||
</Product>
|
||||
|
||||
48
plugins/hal-zwave/resources/config/everspring/st815.xml
Normal file
48
plugins/hal-zwave/resources/config/everspring/st815.xml
Normal file
|
|
@ -0,0 +1,48 @@
|
|||
<?xml version="1.0" encoding="utf-8"?>
|
||||
<Product xmlns='http://code.google.com/p/open-zwave/'>
|
||||
<!-- Configuration Parameters -->
|
||||
<CommandClass id="112">
|
||||
<Value type="byte" index="1" genre="config" label="Basic Set Level" units="%" min="0" max="99" value="99">
|
||||
<Help>
|
||||
Defines the level in the Basic Set event sent to group 2 when the sensor is triggered. Default is 99 (full brightness for a Z-Wave dimmer). 0 disables.
|
||||
</Help>
|
||||
</Value>
|
||||
<Value type="short" index="2" genre="config" label="Lux On Trigger" units="LUX" min="0" max="1000" value="300">
|
||||
<Help>
|
||||
Lux level to trigger when a ON command is sent out. 0 will clear the value.
|
||||
</Help>
|
||||
</Value>
|
||||
<Value type="short" index="3" genre="config" label="Lux Off Trigger" units="LUX" min="0" max="1000" value="500">
|
||||
<Help>
|
||||
Lux level to trigger when an OFF command is sent out. 0 will clear the value.
|
||||
</Help>
|
||||
</Value>
|
||||
<Value type="short" index="4" genre="config" label="Lux Timer Off Trigger" units="minutes" min="1" max="480" value="240">
|
||||
<Help>
|
||||
Set Lux timer trigger to send an OFF command. 0 will clear the value.
|
||||
</Help>
|
||||
</Value>
|
||||
<Value type="short" index="5" genre="config" label="Auto Report Time" units="minutes" min="0" max="1439" value="0">
|
||||
<Help>
|
||||
Sets the auto report time interval. 0 disables.
|
||||
</Help>
|
||||
</Value>
|
||||
<Value type="short" index="6" genre="config" label="Auto Report Lux" units="LUX" min="30" max="1000" value="0">
|
||||
<Help>
|
||||
Sets the auto report Lux interval. 0 disabled.
|
||||
</Help>
|
||||
</Value>
|
||||
</CommandClass>
|
||||
|
||||
<!-- COMMAND_CLASS_ALARM doesn't respond -->
|
||||
<CommandClass id="113" getsupported="false" />
|
||||
|
||||
<!-- COMMAND_CLASS_ASSOCIATION. Groups -->
|
||||
<CommandClass id="133">
|
||||
<Associations num_groups="2">
|
||||
<Group index="1" max_associations="1" label="Reports" auto="true" />
|
||||
<Group index="2" max_associations="3" label="Basic" auto="true" />
|
||||
</Associations>
|
||||
</CommandClass>
|
||||
</Product>
|
||||
|
||||
12
plugins/hal-zwave/resources/config/everspring/tse03.xml
Normal file
12
plugins/hal-zwave/resources/config/everspring/tse03.xml
Normal file
|
|
@ -0,0 +1,12 @@
|
|||
<?xml version="1.0" encoding="utf-8"?>
|
||||
<Product xmlns='http://code.google.com/p/open-zwave/'>
|
||||
<!-- COMMAND_CLASS_WAKE_UP. This class is in the list reported by the HEM, but it does not
|
||||
respond to requests. It still needs to be supported so that wake up notifications are handled. -->
|
||||
<CommandClass id="132" create_vars="false" />
|
||||
<!-- COMMAND_CLASS_ASSOCIATION. Groups -->
|
||||
<CommandClass id="133">
|
||||
<Associations num_groups="1">
|
||||
<Group index="1" max_associations="5" label="Reports" auto="true" />
|
||||
</Associations>
|
||||
</CommandClass>
|
||||
</Product>
|
||||
Loading…
Add table
Add a link
Reference in a new issue