ziver/hal
1
1
Fork 0
Code Pull requests Releases Activity

Some Arduino refactoring and it builds now

Browse source
This commit is contained in:
Ziver Koc 2016-05-02 10:56:15 +02:00
parent 606e767f34
commit d377bbc0a9
14 changed files with 92 additions and 62 deletions
Download patch file Download diff file Expand all files Collapse all files

72
arduino/HalMultiSensor/SensorBH1750.h Executable file
View file

@ -0,0 +1,72 @@
/*
This is a library for the BH1750FVI Digital Light Sensor
breakout board.
The board uses I2C for communication. 2 pins are required to
interface to the device.
Datasheet:
http://rohmfs.rohm.com/en/products/databook/datasheet/ic/sensor/light/bh1750fvi-e.pdf
based on Christopher Laws, March, 2013 code.
*/
#ifndef SensorBH1750_H
#define SensorBH1750_H
#include <Wire.h>
#include "HalInterfaces.h"
#define BH1750_DEBUG 0
#define BH1750_I2CADDR 0x23
// No active state
#define BH1750_POWER_DOWN 0x00
// Waiting for measurement command
#define BH1750_POWER_ON 0x01
// Reset data register value - not accepted in POWER_DOWN mode
#define BH1750_RESET 0x07
// Start measurement at 1lx resolution. Measurement time is approx 120ms.
#define BH1750_CONTINUOUS_HIGH_RES_MODE 0x10
// Start measurement at 0.5lx resolution. Measurement time is approx 120ms.
#define BH1750_CONTINUOUS_HIGH_RES_MODE_2 0x11
// Start measurement at 4lx resolution. Measurement time is approx 16ms.
#define BH1750_CONTINUOUS_LOW_RES_MODE 0x13
// Start measurement at 1lx resolution. Measurement time is approx 120ms.
// Device is automatically set to Power Down after measurement.
#define BH1750_ONE_TIME_HIGH_RES_MODE 0x20
// Start measurement at 0.5lx resolution. Measurement time is approx 120ms.
// Device is automatically set to Power Down after measurement.
#define BH1750_ONE_TIME_HIGH_RES_MODE_2 0x21
// Start measurement at 1lx resolution. Measurement time is approx 120ms.
// Device is automatically set to Power Down after measurement.
#define BH1750_ONE_TIME_LOW_RES_MODE 0x23
class SensorBH1750 : public SensorPowerConsumption, public SensorLight{
public:
virtual void setup();
virtual unsigned int getLuminosity();
virtual unsigned int getConsumption();
virtual void reset();
void configure(uint8_t mode);
private:
unsigned int pulses;
void write8(uint8_t data);
};
#endif // SensorBH1750_H