Added new telstick windows drivers

Former-commit-id: 797b455c0a2b358e691a198017acea4eb5c02f73

arduino/lib/BH1750/Examples/BH1750_LCD/BH1750_LCD.ino

@@ -0,0 +1,60 @@
+ /*
+  This is a simple code to test BH1750FVI Light senosr
+  communicate using I2C Protocol 
+  this library enable 2 slave device address
+  Main address  0x23 
+  secondary address 0x5C 
+  connect this sensor as following :
+  VCC >>> 3.3V
+  SDA >>> A4 
+  SCL >>> A5
+  addr >> A3
+  Gnd >>>Gnd
+
+  Written By : Mohannad Rawashdeh
+  
+ */
+ 
+ // First define the library :
+ #include <BH1750FVI.h> // Sensor Library
+ #include <Wire.h> // I2C Library
+ #include <LiquidCrystal.h>
+
+ LiquidCrystal lcd(12, 11, 5, 4, 3, 2);
+ uint16_t Light_Intensity=0;
+ // Call the function 
+
+ BH1750FVI LightSensor;
+ 
+
+void setup() {
+  // put your setup code here, to run once:
+  Serial.begin(9600);
+  lcd.begin(16, 2);
+ 
+ //  call begin Function so turn the sensor On .
+  LightSensor.begin();
+  LightSensor.SetAddress(Device_Address_H); //Address 0x5C
+  LightSensor.SetMode(Continuous_H_resolution_Mode);
+  lcd.setCursor(0, 0);
+  lcd.print("BH1750 Sensor");
+  lcd.setCursor(1, 1);
+  lcd.print("Please wait..."); 
+  delay(3000);
+  lcd.clear();
+ 
+}
+ 
+ void loop() {
+  // put your main code here, to run repeatedly: 
+   lcd.clear();
+   lcd.setCursor(0, 0);
+   lcd.print(" Intensity = ");
+   lcd.setCursor(5, 1);
+   Light_Intensity = LightSensor.GetLightIntensity();
+   lcd.print(Light_Intensity);
+   lcd.print(" Lux");
+   delay(2000);
+   
+  
+}