Activate/Deactive ALL ON/OFF Activate/Deactivate association sending for group 1 - Note: Parameter 15 must set to 1 to work properly. Key no.2 is not represented by any physical device except of devices on association list. This functionality prevents of lack of reaction on pressing key no.2 through polling devices from association list one by one and checking their actual statuses. Options for changing parameter 1-99 Options for changing parameter 1-255 (10ms - 2,5s) Options for changing parameter 1-255 (10ms - 2,5s) - 0: this value disables the smooth change in light intensity. NOTE: value 0 is required for inductive and capacitive devices unsuitable for dimming (e.g. fluorescent lamps, motors, etc...) Options for changing parameter 1-99 Options for changing parameter 2-99 Options for changing parameter 1-98 Binary inputs type configuration Double-click set lighting at 100% Saving state before power faillure The function of 3-way switch provides the option to double key no. 1. The dimmer may control two bi-stable push-buttons or an infinite number of mono-stable push-buttons. (default value 0) The dimmer communicate the level to the associated devices. (default value 0) This function allow user to change [On-Off] bi-stable keys (parameter no. 14) (default value 0) This function will enable decreasing the minimum level of the Dimmer by extending the control impulse.[100 - 170] By changing the minimem level, the user may completely dim LED bulbs. Not all LED bulbs available on the market have the dimmming option. WARNING: Wrong setting of the function may cause incorrect operation of the Dimmer. Alarm of any type (general alarm, water flooding alarm, smoke alarm: CO, CO2, temperature alarm) défault value 3-alarm flashing Amount of time the device keeps on flashing after receipt of Alarm Frame (1s-65535s)