diff --git a/.gitmodules b/.gitmodules
new file mode 100644
index 00000000..591c46cd
--- /dev/null
+++ b/.gitmodules
@@ -0,0 +1,3 @@
+[submodule "arduino/lib/NexaControl"]
+	path = arduino/lib/NexaControl
+	url = https://github.com/dcollin/NexaControl.git
diff --git a/arduino/NexaTellstick/NexaTellstick.ino b/arduino/NexaTellstick/NexaTellstick.ino
new file mode 100644
index 00000000..df234534
--- /dev/null
+++ b/arduino/NexaTellstick/NexaTellstick.ino
@@ -0,0 +1,155 @@
+#include "NexaSelfLearningReceiver.h"
+
+#define TX_PIN          10
+#define RX_PIN          4
+#define RX_LED          13
+
+//Radio RX
+NexaSelfLearningReceiver receiver = NexaSelfLearningReceiver(RX_PIN, RX_LED);
+short dim = 0;
+uint64_t receivedSignal = 0;
+
+//Serial RX
+byte rxBuffer[79];
+
+void setup(){
+    Serial.begin(9600);
+    pinMode(8, OUTPUT); digitalWrite(8, LOW);
+    pinMode(9, OUTPUT); digitalWrite(9, HIGH);
+    pinMode(6, OUTPUT); digitalWrite(6, LOW);
+    pinMode(3, OUTPUT); digitalWrite(3, HIGH);
+};
+
+void loop(){
+  
+    //Receive and execute command over serial
+    if(Serial.available() > 0){
+        uint8_t rxDataSize = Serial.readBytesUntil('+', &rxBuffer[0], 79);
+        if(rxDataSize > 0){
+          if(parseRxBuffer(&rxBuffer[0], 0, rxDataSize, false, 3, 0)){
+            //Serial.println(F("DEBUG:PARSE OK"));
+          }else{
+            //Serial.println(F("DEBUG:PARSE ERROR"));            
+          }
+        }
+    }
+    
+    //Receive signal over air and send it over serial
+    receivedSignal = receiver.receiveSignal(NULL, NULL, NULL, NULL, &dim, 100);
+    if(receivedSignal > 0){
+        Serial.print(F("+Wclass:command;protocol:arctech;model:selflearning;data:0x"));
+        uint8_t hexToSend = (dim == NULL ? 8 : 9);
+        for(int8_t i = hexToSend-1; i >= 0; --i){
+            Serial.print( (byte)((receivedSignal>>(4*i))&0x0F), HEX);
+        }
+        Serial.println(F(";"));
+    }
+    
+};
+
+bool parseRxBuffer(byte* buffer, uint8_t startIndex, uint8_t endIndex, bool debug, uint8_t repeat, uint8_t pause){
+    if(startIndex > endIndex){
+        return false;
+    }
+    char c = buffer[startIndex];
+    //Serial.print("DEBUG: char:"); Serial.println(c, DEC);
+    switch(c){
+        case 'S':
+            return handleS(buffer, startIndex+1, endIndex, debug, repeat, pause);
+        case 'T':
+            return handleT(buffer, startIndex+1, endIndex, debug, repeat, pause);
+        case 'V':
+            Serial.println(F("+V2"));
+            return parseRxBuffer(buffer, startIndex+1, endIndex, debug, repeat, pause);
+        case 'D':
+            return parseRxBuffer(buffer, startIndex+1, endIndex, !debug, repeat, pause);
+        case 'P':
+            if(endIndex-startIndex+1 < 3){return false;} //at least {'P',[p-value],'+'} must be left in the buffer
+            return parseRxBuffer(buffer, startIndex+2, endIndex, debug, repeat, buffer[startIndex+1]);
+        case 'R':
+            if(endIndex-startIndex+1 < 3){return false;} //at least {'R',[r-value],'+'} must be left in the buffer
+            return parseRxBuffer(buffer, startIndex+2, endIndex, debug, buffer[startIndex+1], pause);
+        case '+':
+            return true;
+        default:
+            //Serial.print("DEBUG: unknown char: '"); Serial.print(c, BIN); Serial.println("'");
+            return false;
+    }
+};
+
+bool handleS(byte* buffer, uint8_t startIndex, uint8_t endIndex, bool debug, uint8_t repeat, uint8_t pause){
+    //Parse message received from serial
+    uint8_t S_data[78]; //78 pulses
+    uint8_t pulseCount = 0;
+    for(uint8_t i = startIndex; i <= endIndex; ++i){
+        if(buffer[i] == '+'){
+            break;
+        }else if(i == endIndex){
+            return false;
+        }else{
+            S_data[pulseCount++] = buffer[i];
+        }
+    }
+    //Send message
+    for(uint8_t rep = 0; rep < repeat; ++rep){
+        bool nextPinState = HIGH;
+        for(int i = 0; i < pulseCount; ++i){
+            if(S_data[i] > 0 || i == pulseCount-1){
+                digitalWrite(TX_PIN, nextPinState);
+                delayMicroseconds(S_data[i]*10);
+            }
+            nextPinState = !nextPinState;
+        }
+        delay(pause);
+    }
+    return true;
+};
+
+bool handleT(byte* buffer, uint8_t startIndex, uint8_t endIndex, bool debug, uint8_t repeat, uint8_t pause){
+    //Parse message received from serial
+    uint8_t T_data[72]; //0-188 pulses
+    if(endIndex - startIndex < 5){
+        Serial.println("DEBUG: wrong size!");
+        return false;
+    }
+    uint8_t buff_p = startIndex;
+    uint8_t T_times[4] = {buffer[buff_p++], buffer[buff_p++], buffer[buff_p++], buffer[buff_p++]};
+    uint8_t T_long = buffer[buff_p++];
+    uint8_t T_bytes = 0;
+    if( (T_long/4.0) > (float)(T_long/4) ){
+        T_bytes = T_long/4 + 1;
+    }else{
+        T_bytes = T_long/4;
+    }
+    uint8_t j = 0;
+    while(j < T_bytes){
+        if(buffer[buff_p] == '+'){
+            break;
+        }else if(buff_p >= endIndex){
+            return false;
+        }else{
+            T_data[j++] = buffer[buff_p++];
+        }
+    }
+    if( j != T_bytes ){
+        return false;
+    }
+    //Send message
+    for(uint8_t rep = 0; rep < repeat; ++rep){
+        bool nextPinState = HIGH;
+        for(int i = 0; i < T_long; ++i){
+            uint8_t timeIndex = (T_data[i/4]>>(6-(2*(i%4))))&0x03;
+            if(T_times[timeIndex] > 0 || i == T_long-1){
+                digitalWrite(TX_PIN, nextPinState);
+                delayMicroseconds(10*T_times[timeIndex]);
+            }
+            nextPinState = !nextPinState;
+        }
+        digitalWrite(TX_PIN, LOW);
+        if(rep < repeat-1){
+            delay(pause);
+        }
+    }
+    return parseRxBuffer(buffer, buff_p, endIndex, debug, repeat, pause);
+};
+
diff --git a/arduino/lib/NexaControl b/arduino/lib/NexaControl
new file mode 160000
index 00000000..10bfee91
--- /dev/null
+++ b/arduino/lib/NexaControl
@@ -0,0 +1 @@
+Subproject commit 10bfee9156bb581e67c305ab8dc46dde86f2ed71